Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2000 >> S-Type (X200) V8-4.0L (AJ28) >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Axle Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Axle Assembly



Removal
1. Remove the axle shafts.





2. CAUTION: Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft.

Detach the driveshaft from the differential flange.
Mark the position of the driveshaft in relation to the differential flange.
Mark the position of the balance nut in relation to the differential flange (if fitted).
Mark the position of each nut and bolt in relation to the transmission flexible joint.





3. Disconnect the axle assembly breather tube from the crossmember.

4. CAUTION: When supporting the axle assembly, use a suitable packing material to prevent damage to the underside of the casing.

Support the axle assembly.





5. NOTE: Take care not to lose the washer when removing the forward axle retaining bolt.

Remove the axle assembly.

Installation








1. NOTE: Take care not to mix up the washer positions when installing the forward axle retaining bolt.

NOTE: Make sure that the driveshaft nuts and bolts are refitted in the correct locations.

To install, reverse the removal procedure.

pro multis · About Operation CHARM