Data Link Connector: Locations

Data Link Connector:

Connector FC053:

The diagnostic connector in the bottom edge of the driver's side fascia provides the interface between the vehicle and the Jaguar PDU or a universal scan tool. A scan tool communicates only with the control modules connected to the ISO 9141/2 network, for the retrieval of any DTC they contain. The PDU communicates with the control modules connected to the CAN, the SCP or the ISO 9141/2 network (only the CAN network is used to communicate with the ECM), for:
- the retrieval of DTC
- fault diagnosis
- control module programming
- the enabling/disabling of system feature options.