A2 Status/Relationship Check

A2 STATUS / RELATIONSHIP CHECK





1. Turn the ignition switch to the ON position.
2. Move the selector lever slowly from P to 2 and back, noting the illumination / position relationship as follows:
- Does state illumination match the lever position in each direction of travel?
Yes --> GO to [A4] A4 Check Harness Signal Continuity - D to 4 Switch
No --> GO to [A3] A3 Check Selector Cable Adjustment

- With lever at D (when moving from 2 to P) is 3 or 4 illuminated?
Yes --> GO to [A3]
No --> GO to [A5] A5 Check D to 4 Switch

- With lever moved from P. to position 4, is D illuminated?
Yes --> GO to [A4]
No --> GO to [A5]