Left-Hand

Removal


1. WARNING: ENSURE THAT THE EXHAUST
CATALYST ARE COLD BEFORE COMMENCING WORK


Disconnect the battery ground lead. Service and Repair







2. NOTE: LH shown, RH access equal


From inside the engine compartment, release the relevant sensor(s) multiplug from its mounting bracket and disconnect the plug.







3. NOTE: LH shown, RH access equal


From underneath the vehicle, remove the sensor.

Installation

1. Fitting is the reverse of the removal procedure, noting that a new sealing washer should be used.
See Battery Reconnection Procedure. Service and Repair







2. Tighten the sensor to specification.
3. Make good the exhaust seals.