Locks: Testing and Inspection

Locks, Latches and Entry Systems


Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
- Misaligned door(s),hood or - Fuse(s)
luggage compartment lid
- Door latch(es) - Wiring harness
- Actuating rod(s) - Electrical connector(s)
- Exterior door handle(s) - Door lock actuator(s)
- Interior door handle(s) - Remote transmitter batteries
- Door lock cylinder - Vehicle battery
- Cable(s) - Remote transmitter
- Luggage compartment lid - Door lock switch(es)
exterior release switch
- Front electronic module (FEM)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, verify the symptom and refer to the Jaguar Approved Diagnostic System.