Symptom Chart

Exhaust System

Inspection and Verification
1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical damage.

Visual Inspection Chart

Mechanical
Leaks
Metal fatigue
Pipes, mufflers and catalytic converters
Joints
Mountings
Clearance around components

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart.

Symptom Chart

Condition(s):

Noisy or leaking exhaust

Possible Source(s):
- Exhaust system/components.

Action(s) to take:
- INSTALL new components as necessary.

Loss of power

Possible Source(s):
- Restricted exhaust system.

Action(s) to take:
- INSTALL new components as necessary.

Possible Source(s):
- Fuel system.

Action(s) to take:
- CHECK and REPAIR the fuel system as necessary. For additional information, Fuel System

Possible Source(s):
- Ignition system.

Action(s) to take:
- CHECK and REPAIR the ignition system as necessary. For additional information, Ignition System

Possible Source(s):
- Electronic engine control.

Action(s) to take:
- CHECK and REPAIR the electronic engine control system as necessary. For additional information, Electronic Engine Controls