Control Module HVAC: Service and Repair

A/CCM - LHD

Removal
1. Position the driver's seat fully rearward
2. Glove box







3. Remove the duct - passenger footwell
- Remove the nut (1) duct to blower







4. Disconnect the BPM multiplug
- Slacken the bolt (1), noting that it is captive in the multiplug
- Disconnect the multiplug







5. Remove the BPM
1. Remove the fixings (3), BPM to fascia reinforcement
2. Remove the BPM







6. Slacken the A/CCM upper fixing using a 'Snap-On SDP 11 stubby screwdriver, or similar







7. Remove the A/CCM
1. Remove the lower fixings (2) A/CCM to heater/cooler case
2. Reposition the A/CCM to disconnect (4) multiplugs

Installation
1. Installation is the reverse of the removal procedure