Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2003 >> XJ (X308) V8-4.0L SC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Selector Indicator Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Selector Indicator Module



Selector Indicator Module

Removal





1. Disconnect battery ground cable.
Remove the battery cover.
2. Remove the selector lever knob.
3. Remove the J-gate surround.
4. Remove the console finisher veneer panel.





5. Remove the selector indicator module screws.





6. Remove the selector indicator module.
Free the D to 4 switch harness multiplug from the mounting bracket and disconnect the multiplug.
Displace the P switch multiplug from the mounting bracket.
Route the D to 4 harness from under the P switch harness.

Installation
1. Installation is the reverse of the removal procedure
2. Connect the battery and fit the battery cover.
Reset the radio and the clock.




pro multis · About Operation CHARM