Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2007 >> XJ (X350) V8-4.2L SC >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Motor Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Motor Position Sensor: Service and Repair



Seat Position Sensor

Removal

WARNING:
- To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any air bag supplementary restraints system (SRS) components. To deplete the backup power supply energy, disconnect the battery ground cable and wait for one minute. Failure to follow this instruction may result in personal injury.
- Never probe the electrical connectors of the air bag modules or any other SRS component. Failure to follow this instruction may result in personal injury.

NOTE: Make sure the driver seat is adjusted to its maximum height before removal.

1. Remove the driver seat.
2. Disconnect the seat position sensor electrical connector.







3. Remove the seat position sensor.







Installation

WARNING:
- To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any air bag SRS components. To deplete the backup power supply energy, disconnect the battery ground cable and wait for one minute. Failure to follow this instruction may result in personal injury.
- Never probe the electrical connectors of the air bag modules or any other SRS component. Failure to follow this instruction may result in personal injury.
- Make sure the sensor is correctly located into the seat track. Failure to follow this instruction may result in personal injury.

1. To install, reverse the removal procedure.
- Tighten to 5 Nm.





pro multis · About Operation CHARM