Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2009 >> XK (X150) V8-4.2L SC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor LH
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position (CMP) Sensor LH






Camshaft Position (CMP) Sensor LH

Removal
1 Remove the intake air resonator. For additional information, refer to Intake Air Resonator Service and Repair




2 Disconnect the CMP sensor electrical connector.
- Slide the red connector latch to one side.




3 Remove the CMP sensor.
- Remove the Torx bolt.
- Remove and discard the O-ring seal.

Installation
1 Install the CMP sensor.
- Clean the components.
- Install a new O-ring seal.
- Tighten the Torx bolt to 7 Nm (5 lb.ft).
- Connect and secure the electrical connector.
2 Install the intake air resonator. For additional information, refer to Intake Air Resonator Service and Repair

pro multis · About Operation CHARM