Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2009 >> XK (X150) V8-4.2L SC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair






Crankshaft Position (CKP) Sensor

Removal
1 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications [1][2]Battery
2
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.




3
NOTE:
Clean the components general area prior to dismantling.
Remove the crankshaft position (CKP) sensor.
- Disconnect the electrical connector.
- Remove the Torx screw.

Installation
1 Install the CKP sensor.
- Clean the component mating faces.
- Tighten the Torx screw to 8 Nm (6 lb.ft).
- Connect the electrical connector.
2 Connect the battery ground cable and install the cover. For additional information, refer to Specifications [1][2]Battery

pro multis · About Operation CHARM