Maintenance Required Lamp/Indicator: Service and Repair

Message Center Reset Procedure

To reset the service interval indicator, the following process switch presses must each be carried out within 3 seconds:

- With the vehicle in power mode 0, (ignition off) press and hold the rear fog lamp switch.

- Allow the vehicle to enter power mode 6 (press the start button without a foot on the brake).

- Immediately release the rear fog lamp switch.

- Press and hold the trip computer cycle switch.

- Press and hold the rear fog lamp switch.

- Continue to hold the trip computer and rear fog lamp switches.

- If the process has been successful, the message center will display 'RESETTING SERVICE MODE' and then display 'SERVICE MODE RESET' after 10 seconds.

- Release both switches and return the vehicle ignition to off, power mode 0.