Transmission Cover Components Disassembly
Disassembly - Transmission Cover ComponentsPlace the selector arm plates and shift rail in the neutral position (centered).
Rotate the shift rail counterclockwise until the selector arm disengages from the selector arm plates and the selector arm roll pin is accessible.
Pull the shift rail rearward until the selector arm contacts the first-second gear Shift fork.
Remove the selector arm roll pin with a 5-mm (3/16-in.) diameter pin punch and remove the shift rail.
Remove the shift forks (43), selector arm plates (44), selector arm (45); roll pin and interlock plate (46).
Remove the shift rail oil seal (47) and 0-ring (48) with a pry tool.
Remove the shift rail plug (49) with a hammer and punch.
Remove the nylon inserts (50) and selector arm plates (44) from the shift forks (43). Notethe position of the inserts and plates for assembly reference.