Disassembly and Assembly - Standard

DISASSEMBLY

Fig. 49:

1. Remove pinion mate shaft lock screw (Fig. 49).
2. Remove pinion mate shaft.

Fig. 50:

3. Rotate the differential side gears and remove the differential pinion gears and thrust washers (Fig. 50).
4. Remove the differential side gears and thrust washers.

ASSEMBLY
1. Install the differential side gears and thrust washers.
2. Install the differential pinion gears and thrust washers.
3. Install the pinion mate shaft.
4. Align the hole in the pinion mate shaft with the hole in the differential case and install the pinion mate shaft lock screw.
5. Lubricate all differential components with hypoid gear lubricant.