Procedures

RADIO BACKUP

The radio hard disk drive (HDD) can be backed up to save customer data in the event that a radio replacement is required. This procedure can only be done with all radios with a hard disk drive. All other radios do not have a HDD.

1. Turn the ignition to RUN, engine OFF.
2. Power on the external HDD.
3. Connect the external HDD to the radio using the USB (Universal Serial Bus) cable. The radio display will change to the "Manage My Files" screen.
4. Connect the scan tool and perform the following steps to place the radio into "Dealership Mode":
- ECU View
- Radio
- Misc. Functions
- Service Mode
- Start
- Next

5. Follow the on screen instructions on the radio to back up the radio HDD.