Draining

DRAINING - GAS










WARNING: Do not remove the cylinder block drain plugs or loosen the radiator draincock with system hot and under pressure. Serious burns from coolant can occur.

NOTE: Radiator draincock is located on the right/lower side of radiator facing to front of vehicle.

1. Remove radiator pressure cap from radiator or coolant recovery container as necessary.
2. Raise and support vehicle.
3. Attach one end of a hose to the draincock. Put the other end into a clean container. Open draincock and drain coolant from radiator.
4. If necessary, siphon coolant from coolant recovery container. (Diesel engine)