Floor Distribution Duct - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable. Wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in possible serious or fatal injury.

NOTE: LHD model shown in illustrations. RHD model similar.

PASSENGER SIDE





1. Remove the instrument panel and place it on a workbench Instrument Panel - Removal.
2. Remove the HVAC housing assembly from the instrument panel HVAC Housing - Removal.
3. Disconnect the floor duct (1) from the passenger side of the air distribution housing (2) and remove the duct.

DRIVER SIDE






NOTE: Illustration shown with instrument panel removed for clarity.

1. Disconnect and isolate the negative battery cable.
2. Remove the steering column opening cover Steering Column Opening Cover - Removal.
3. Disconnect the floor duct (1) from the driver side of the air distribution housing (2) and remove the duct.