Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

1982-86 CJ & SCRAMBLER; 1984-87 CHEROKEE & WAGONEER; 1986-87 COMMANCHE; 1987 WRANGLER

1. Install caliper over rotor and in anchor plate.
2. Align caliper and anchor plate, then install caliper mounting pins and torque to 30 ft. lbs.
3. Install new washers on brake line connector or fitting and connect brake line to caliper. Torque brake line bolt to 160 inch lbs. or brake line fitting to 25 ft. lbs. on CJ and Scrambler models or 23 ft. lbs. on all other models.
4. Fill master cylinder to within 1/4 inch of reservoir rims, then depress brake pedal several times to seat brake shoes.
5. Install wheel and tire assemblies, then lower vehicle.
6. Check master cylinder fluid level and correct as necessary, then check operation of brake system.