Wheel Alignment - Specification Revision

39E372
1984-1987 CHEROKEE/WAGONEER MODELS
AUGUST 1987
STEERING AND FRONT AXLE Attention: Workshop

FRONT WHEEL ALIGNMENT SPECIFICATION REVISION

The camber specification for 1984-1987 Cherokee/Wagoneer models is being changed.

The new camber specifications is 0~ + 1/2~ - 3/4~. The revision is to increase the negative camber specification by 1/4~. Revised specifications are listed below.

Front Wheel Alignment Specifications


ADJUSTMENT SET-TO OK RANGE

TOE:
Right Wheel 0~ 1/32" IN
to 1/32" OUT

Left Wheel 0~ 1/32" IN
to 1/32" OUT


CAMBER 0~ +1/2~ to -3/4~


CASTER 7-1/2" 7~ to 8~


OUTSIDE WHEEL
TURN ANGLE 33~ MAX. 33~ to 32~

2185
*Revised the negative camber specification from 1/2~ to 3/4~

A revised chart is attached. Moisten the back and apply it over the chart on page G-7 of M.R. 244.

FILING INSTRUCTIONS

Record this I.S. Note on Page G-7 of M.R. 244 and file it in the manual.