Fuel Filter: Service and Repair

Fuel Filter And Shield:

REMOVAL
1. Disconnect the negative battery terminal, and remove the fuel tank cap.
2. Raise, and support the vehicle for access.
3. Remove the fuel filter shield. Remove fuel filter hoses and clamps from the inlet and outlet fuel lines. Remove the retaining strap bolt, and remove the filter.
INSTALLATION
1. Install the new filter in the retaining strap. Check the direction of flow by the markings on the filter, and ensure it is correct.
2. Install the retaining strap bolt, and torque to 12 Nm (8.8 lb-ft)
3. Install the inlet and outlet hoses, and clamps. Tighten the clamps securely. Reinstall the filter shield, and lower the vehicle. Reconnect the negative battery terminal.