Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1988 >> Wrangler L4-150 2.5L VIN H TBI >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Full Open Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Full Open Switch: Service and Repair

Wide Open Throttle (WOT) Switch Description:





REMOVAL

1. Remove the air inlet bonnet.
2. Disconnect and remove the throttle return springs.
3. Disconnect the accelerator cable.
4. Disconnect the electrical connector from the WOT switch.
5. Remove the two (2) mounting screws, and remove the WOT switch.



INSTALLATION

1. Install the new WOT switch on the throttle bracket, but don't tighten the mounting screws all of the way at this time.
2. Connect the electrical connector from the wire harness to the WOT switch.
3. Connect the accelerator cable.
4. Adjust the WOT switch. Refer to ADJUSTMENT PROCEDURES.
5. Fully tighten the mounting screws after the WOT switch has been adjusted.
6. Install the air inlet bonnet.
pro multis · About Operation CHARM