Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

LESS INTERMITTENT WIPERS
1. Measure resistance from washer pump connector terminal B to ground. Resistance should be 0 ohms. If not, repair open between terminal B and ground.
2. Turn ignition switch to On position, then press washer switch.
3. Measure voltage at switch connector terminal B. Battery voltage should be present. If not, replace wiper/washer switch.
4. Measure voltage at washer pump connector terminal A. If battery voltage is present, replace pump. If battery voltage is not present, repair open between switch connector and pump connector.

WITH INTERMITTENT WIPERS
1. Measure resistance from washer pump connector terminal B to ground. Resistance should be 0 ohms. If not, repair open between terminal B and ground.
2. Turn ignition switch to On and rotate washer switch tab forward.
3. Measure voltage at wiper/washer switch connector terminal B located at intermittent wipe module. Battery voltage should be present. If not, replace wiper switch.
4. Measure voltage at intermittent wipe module connector terminal B. Battery voltage should be present. If not, replace intermittent
5. Measure voltage at washer pump connector terminal A. If battery voltage is present, replace pump. If battery voltage is not present, repair open from intermittent wipe module connector terminal B.