Alignment: Service and Repair

CAMBER

Camber is preset at the factory and is not adjustable. If the camber angle is not within specifications, replace the suspension components responsible for the incorrect angles.

Fig.1 Caster Adjustment:

CASTER

Caster is set at positive 7° and is adjusted by turning cam until proper setting is reached.

TOE

1. Center steering gear, then lock steering wheel to hold in position.
2. Loosen drag link sleeve clamp bolts, then turn drag link sleeve until right wheel toe is as specified in Specifications.

Fig.2 Drag Link & Tie Rod Clamp Location:

3. Position bolt heads as shown, then tighten.
4. Adjust left wheel toe position with tie rod. Turn sleeve until left wheel is at specifications.
5. Position clamp bolts as shown, then tighten.
6. Ensure toe setting does not change during clamp tightening.