System Specifications

Adjusting Strap Bolts 23 Nm (200 in. lbs.)
Catalytic Converter-to-Exhaust Pipe Band Torca Clamp 71 Nm (52 ft. lbs. )
Exhaust Pipe-to-Manifold Nuts 31 Nm (23 ft. lbs.)
Exhaust and Intake Manifold Bolts (4.0L)
# 1-5 & # 8-11 33 Nm (24 ft. lbs.)
Exhaust Manifold Nuts (4.0L)
# 6 & 7 31 Nm (23 ft. lbs.)
Exhaust Manifold Nuts/Bolts (5.2L) 27 Nm (20 ft. ]bs.)
Exhaust Manifold Heat Shield Nuts (5.2L) 27 Nm (20 ft. lbs.)
Floor Pan Heat Shield Bolts/Nuts 5 Nm (45 in. lbs.)
Generator Mounting Bolts 41 Nm (30 ft. lbs.)
Intake Manifold Bolts (5.2L) Refer to procedure
Muffler-to-Catalytic Converter Band Torca Clamp 71 Nm (52 ft. lbs.)
Oxygen Sensor 48 Nm (35 ft. lbs.)
Plenum Pan Bolts (5.2L) Refer to procedure
Rear Tailpipe Hanger Bolts 22 Nm (192 in. lbs.)
Throttle Body Bolts/Nuts 23 Nm (200 in. lbs.)
Catalytic Converter/Exhaust Pipe Exhaust Clamp Assembly 61 Nm (45 ft. lbs.)
Muffler-to-Catalytic Converter Exhaust Clamp Assembly 61 Nm (45 ft. lbs.)

NOTE: Vehicles may have either a Torca Clamp or an Exhaust Clamp Assembly.