Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1997 >> Wrangler L6-4.0L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Description and Operation >> Chime System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Chime System


Chime
The chime function is a 1000Hz tone contained with in the cluster. The cluster will not generate more than one chime per condition in the same ignition cycle. If a problem occurs that requires a second chime while the first one is currently being generated, the second chime request will be ignored. The chime will sound for the following conditions:


- Seat Belt Warning -6 seconds after key on
- Key in Ignition Warning - door open with key in ignition
- Engine Temp High - when gauge enters red zone
- Engine Temp Critical - when gauge reaches the high end of the red zone
- Oil Pressure Low - below 6 psi and above 300 RPM
- Volt Gauge Low - when engine controller sets the "charge fail" DTC.
- Volt Gauge High - when engine controller sets the "voltage high" DTC.
pro multis · About Operation CHARM