Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1997 >> Wrangler L6-4.0L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Battery Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Temperature Sensor: Service and Repair

The battery temperature sensor is located under the vehicle battery and is attached to a mounting hole on battery tray.

REMOVAL
1. Remove the battery.

Generator Ratings:




2. Disconnect the sensor pigtail harness from the engine wire harness.
3. Pry the sensor straight up from the battery tray mounting hole.

INSTALLATION
1. Feed the pigtail harness through the hole in top of battery tray and press sensor into top of battery tray.
2. Connect the pigtail harness.
3. Install the battery.
pro multis · About Operation CHARM