Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1998 >> Cherokee 2WD L6-4.0L VIN S >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Control Arm Bushing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Arm Bushing: Service and Repair





REMOVAL
1. Remove the upper suspension arm from axle
2. Position Receiver 7932-1 (J-35581-1), or equivalent over the bushing in the axle and install Bushing Removal/Installer.
3. Remove the bushing by tightening the Long Nut.

NOTE: For two-wheel drive axles and right side on Model 30 axle, do not remove Receiver 7932-1 (J-35581-1), or equivalent at this time.





INSTALLATION
1. Position new bushing, Receiver and Installer on axle.
2. Install the bushing by tightening the Long Nut.
3. Remove tools and install the upper suspension arm.




pro multis · About Operation CHARM