Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1999 >> Cherokee 2WD L4-2.5L VIN P >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Trip Computer, Compass, and Thermometer Display Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trip Computer, Compass, and Thermometer Display Module

REMOVAL AND INSTALLATION
1. Remove the overhead console from the vehicle. See Overhead Console for the procedures.

Trip Computer, Compass, And Thermometer Display Module Removal/Install:




2. Remove the two screws that secure the forward end of the trip computer, compass, and thermometer display module to the overhead console housing.

3. Gently flex the sides of the overhead console housing as required to release the trip computer, compass, and thermometer display module mounting pins.

4. Pull the trip computer, compass, and thermometer display module away from the overhead console housing far enough to access the two wire harness connectors.

5. Unplug the overhead console and push button module wire harness connectors from the trip computer, compass, and thermometer display module.

6. Remove the trip computer, compass, and thermometer display module from the overhead console housing.

7. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 Nm (20 in. lbs.).
pro multis · About Operation CHARM