Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1999 >> Cherokee 2WD L4-2.5L VIN P >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Power Mirror Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Mirror Switch: Service and Repair


REMOVAL AND INSTALLATION
This procedure covers removal of the stand-alone type power mirror switch. Vehicles with power windows and power locks have a power mirror switch which is integral to the Driver Door Module (DDM). See Door Module for the DDM-type power mirror switch service procedures.
1. Disconnect and isolate the battery negative cable.

Stand-Alone Power Mirror Switch Remove/Install:




2. Using a trim stick or another suitable wide flat-bladed tool, gently pry around the perimeter edge of the switch to release the snap clips that secure the switch to the trim panel.
3. Pull the power mirror switch away from the trim panel far enough to access the wire harness connector.
4. Unplug the power mirror switch from the wire harness connector.
5. Reverse the removal procedures to install.
pro multis · About Operation CHARM