Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1999 >> Cherokee 2WD L4-2.5L VIN P >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Switch: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Remove the three screws that secure the seat cushion side shield to the outboard seat cushion frame.
3. Pull the seat cushion side shield away from the seat cushion frame far enough to access the power seat switch wire harness connector.
4. Unplug the wire harness connector from the power seat switch.
5. Remove the seat cushion side shield from the seat.

Power Seat Switch Remove/Install - Typical:




6. Remove the two screws that secure the power seat switch to the inside of the seat cushion side shield.
7. Remove the power seat switch from the seat cushion side shield.
8. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).
pro multis · About Operation CHARM