Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1999 >> Cherokee 2WD L4-2.5L VIN P >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Acceleration/Deceleration Sensor: Service and Repair

REMOVAL
1. Raise and fold rear seat assembly forward for access to sensor.
2. Disconnect switch harness.

Acceleration Switch Mounting:





3. Remove switch mounting screws.
4. Remove the acceleration switch.

INSTALLATION

Acceleration Switch:





CAUTION: The mercury switch (inside the acceleration switch), will not function properly if the switch is installed incorrectly. Verify that the switch locating arrow is pointing to the front of the vehicle.

1. Position switch in mounting bracket.
2. Install switch mounting bolts and tighten to 3 Nm (27.5 inch lbs.).
3. Connect harness to switch. Be sure harness connector is firmly seated.
4. Move seat back to normal position.


pro multis · About Operation CHARM