Headlamp: Service and Repair

REMOVAL
1. Remove the screws attaching the bezel to the grille opening panel.
2. Remove the screws attaching the retaining ring to the headlamp bucket.

Headlamp Connector:

3. Disconnect the headlamp bulb wire harness connector.
4. Separate the bulb from the vehicle.

Headlamp Bezel:

5. Remove the spring attaching the headlamp bucket to the grille opening panel.
6. Slide the headlamp bucket downward to disengage it from the headlamp adjusting screws.

INSTALLATION
1. Position the headlamp bucket in the grille opening panel and slide the headlamp bucket upward to engage it with the headlamp adjusting screws.
2. Install the spring attaching the headlamp bucket to the grille opening panel.
3. Connect the wire harness connector.
4. Position the bulb in the bucket.
5. Position retaining ring on the headlamp bulb and install screws.
6. Install the headlamp bezel.