Cigarette Lighter Relay: Service and Repair

Junction Block:

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR-BAGS SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the steering column opening cover from the instrument panel. Refer to Steering Column Opening Cover Replacement for the procedures.
3. The cigar lighter relay is located on the left side of the combination flasher in the junction block.
4. Remove the cigar lighter relay from the junction block.

INSTALLATION
1. Position the cigar lighter relay in the proper receptacle in the junction block.
2. Align the cigar lighter relay terminals with the terminal cavities in the junction block receptacle.
3. Push in firmly on the cigar lighter relay until the terminals are fully seated in the terminal cavities in the junction block receptacle.
4. Install the steering column opening cover onto the instrument panel. Refer to Steering Column Opening Cover in the Replacement for the procedures.
5. Reconnect the battery negative cable.