Cowl Moulding / Trim: Service and Repair

COWL GRILLE AND SCREEN

REMOVAL

1. Remove the windshield wiper arms from the pivots.
2. Remove the screws that attach the grille to the cowl.
3. Remove the windshield washer tubes from the nozzles.

Fig. 6:

4. Remove the cowl grille and screen from the cowl (Fig. 6).

INSTALLATION

CAUTION: The washer fluid tubes must be routed and installed so that they are not pinched.

1. Position the cowl grille and screen on the cowl.
2. Install the windshield washer tubes on the nozzles.

Fig. 7:

3. Install the cowl screen and grille screws with new sealer. Tighten in sequence (Fig. 7).

NOTE: Force the cowl grille rearward while tightening the screws.

4. Install the windshield wiper arms on the pivots.