Rear Door Latch: Service and Repair

LATCH

REMOVAL

1. Remove access plug.
2. Remove door trim panel.
3. Remove waterdam.

Fig. 5:

4. Remove screws attaching door latch to door (Fig. 5).
5. Disconnect all rods from door latch.
6. Remove door latch from door.

INSTALLATION

1. Position door latch in door.
2. Connect all rods to door latch.
3. Install screws attaching door latch to door. Tighten screws to 11 N.m (8 ft.lbs.) torque.
4. Install waterdam.
5. Install door trim panel.
6. Install access plug.