Rear Door Limiter: Service and Repair

RESTRAINT

REMOVAL

1. Remove the door trim panel.
2. Remove the door restraint (check) retaining pin from the bracket with a punch.

Fig. 7:

3. Remove the nuts and remove the restraint via the access opening in the door inner panel (Fig. 7).

INSTALLATION

1. Position the door restraint in the door by way of the opening and install the nuts. Tighten the nuts to 10 N.m (7 ft.lbs) torque.
2. Position the door restraint in bracket with the holes aligned and insert the retaining pin.