Right Front Fender

RIGHT FRONT FENDER

REMOVAL

1. Raise and support the hood.
2. Remove the grille opening panel (GOP).
3. If equipped, remove the radio antenna mast, and components from the fender.
4. Remove the coolant recovery bottle.
5. Raise and support the vehicle.
6. Remove the right front wheel.
7. Remove the front bumper end cap.
8. Remove the wheelhouse liner.
9. Remove the fender flare and retainers.
10. Disconnect all wire harness connectors.
11. Remove the air deflector.

Fig. 13:

12. Remove the fender lower screws (Fig. 13).
13. Remove the fender top, front and the rear screws.

Fig. 14:

14. Remove the screws attaching the fender to the inner support bracket (Fig. 14).
15. Separate the fender from the inner fender panel.

INSTALLATION

1. Position the fender on the inner fender panel.
2. Install all fender screws finger-tight.
3. Align the fender with the body panels and tighten the screws attaching the fender to the body panels.
4. Install the air deflector.
5. Install the fender flare and retainers.
6. Install the wheelhouse liner.
7. Install the front bumper end cap.
8. Install the wheel, remove the support and lower the vehicle.
9. Install the grille opening panel (GOP).
10. Install the radio antenna.