Front Door Glass Run Weatherstrip

FRONT DOOR GLASS RUN WEATHERSTRIP

REMOVAL

1. Remove door trim panel.
2. Remove waterdam.
3. Starting at rear corner, peel weatherstrip from around door frame.

INSTALLATION

1. Install the weatherstrip in the following sequence:
- Press weatherstrip into upper rear corner.
- Press weatherstrip into lower front corner.
- Work/press the weatherstrip upward and to the upper front corner, seat the weatherstrip into the channel.
- Continue working/pressing the weatherstrip into the channel along the upper window frame.
- Press weatherstrip into lower rear corner.
- Work/press the weatherstrip upward and to the upper rear corner, seat the weatherstrip into the channel.
- Press the weatherstrip to seat into the front lower glass run channel.

2. As applicable, move upward and forward evenly until the weatherstrip seal is fully seated in the channel.
3. Install waterdam.
4. Install door trim panel.