Rear Door Primary Weatherstrip
REAR DOOR PRIMARY WEATHERSTRIPREMOVAL
1. Remove B-pillar upper trim.
2. Remove inner scuff plate.
3. Remove B-pillar lower trim.
4. Remove upper door opening trim.
Fig. 9:
5. Grasp seal and separate from door opening (Fig. 9).
INSTALLATION
1. When installing a door opening weatherstrip seal, start at the door sill center line.
2. Move upward and around edge of door Seat seal on flange.
Fig. 10:
3. Move upward and around the perimeter door opening and seat the weatherstrip on (Fig. 10).
4. Install upper door opening trim.
5. Install inner scuff plate.
6. Install B-pillar lower trim panel.
7. Install B-pillar upper trim panel.