Odometer: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel. Refer to Instrument Cluster Removal and Installation for the procedures.
3. Remove the cluster lens from the cluster housing. Refer to Instrument Cluster Components - Cluster Lens Removal and Installation for the procedures.
4. Remove the odometer reset knob boot by pulling it out of the cluster lens.

INSTALLATION
1. Position the odometer reset knob to the mounting hole from the back of the cluster lens.
2. Pull the odometer reset knob into the mounting hole from the face of the cluster lens.
3. Install the cluster lens onto the cluster housing. Refer to Instrument Cluster Components - Cluster Lens Removal and Installation for the procedures.
4. Install the instrument cluster onto the instrument panel. Refer to Instrument Cluster Removal and Installation for the procedures.
5. Reconnect the battery negative cable.