Front Door Outer Belt Molding

FRONT DOOR OUTER BELT MOLDING

REMOVAL

1. Open the window completely.
2. Remove the outer belt weatherstrip.

Fig. 3:

3. Pry and pull the molding sections from the door panel flange (Fig. 3).

INSTALLATION

1. Start at the forward end of the upper molding, force the molding onto the door panel and continue rearward until it is completely seated on the flange.
2. Mate the rear molding with the upper molding and force the molding edge inward.
3. Continue pressing and moving downward to complete the installation.
4. Install the outer belt weatherstrip.