Windshield Washer Spray Nozzle: Service and Repair

REMOVAL AND INSTALLATION

FRONT
1. Remove the wiper arms from the wiper pivots. See Wiper Arm for the procedures.

Front Washer Nozzle Remove/Install:

2. Remove the eight screws that secure the cowl plenum cover/grille panel and screen to the cowl top panel.
3. Carefully lift the cowl plenum cover/grille panel and screen from the vehicle far enough to access the windshield washer plumbing. Use care so as not to damage the paint around the pivot openings of the panel.
4. Disconnect the windshield washer supply hose and the passenger side washer nozzle hose from the washer nozzle supply hose tee fitting.
5. Remove the cowl plenum cover/grille panel and screen from the vehicle.
6. From the underside of the cowl plenum coven grille panel, disconnect the washer hose from the nozzle fitting.
7. From the underside of the cowl plenum coven grille panel, remove the rivet that secures the nozzle to the opening in the cowl plenum cover/grille panel.
8. Remove the washer nozzle from the cowl plenum cover/grille panel.
9. Reverse the removal procedures to install.

REAR

Rear Washer Nozzle Remove/Install:

1. Unsnap the rear washer nozzle from the rear wiper arm.
2. Disconnect the washer supply hose from the barbed rear washer nozzle nipple.
3. Reverse the removal procedures to install.