Rear Door Glass Run Weatherstrip

REAR DOOR GLASS RUN WEATHERSTRIP

REMOVAL

1. Remove door trim panel.
2. Remove waterdam.
3. Remove window glass.

Fig. 7:

4. Starting at rear corner, peel weatherstrip from around door frame (Fig. 7).

INSTALLATION

1. Starting at the top corner, press seal into place. A small amount of adhesive can be used to hold the weatherstrip in-place, if necessary.
2. As applicable, move downward evenly until the weatherstrip seal is fully seated in the channel.
3. Install window glass.
4. Install waterdam.
5. Install door trim panel.