Removal and Replacement

REMOVAL

Headlamp Jackscrew:

1. Remove jack screw attaching top of headlamp to headlamp mounting module.

Headlamp Removal:

2. Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.
3. Remove all bulb sockets from headlamp module.
4. Separate headlamp from vehicle.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Install all bulb sockets in headlamp module.
2. Position headlamp on vehicle and align ball studs with sockets.
3. Forcefully push headlamp inward to secure ball studs with sockets.
4. Install jack screw attaching top of headlamp to headlamp mounting module.