Panel/Demist Door

REMOVAL
1. Remove and disassemble the heater-A/C housing.
2. Remove the defrost and panel/demist door vacuum actuators from the heater-A/C housing.

Mode Door Lever Remove/Install - Typical:

3. Insert a screwdriver into the latch hole of the panel/demist door pivot shaft to release the latch of the panel/demist door lever, and pull the lever out of the pivot shaft from the outside of the upper half of the heater-A/C housing.

Panel/Demist And Defrost Doors:

4. Reach inside the upper half of the heater-A/C housing and carefully flex the panel/defrost door enough so that the door pivot clears the pivot hole in the housing.
5. Remove the panel/demist door from the heater- A/C housing.

INSTALLATION
1. Reverse the removal procedures to install.