Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2000 >> Wrangler L6-4.0L VIN S >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

REMOVAL

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the kick cover from the Heater-A/C housing. See Kick Cover for the procedures.

Blower Motor Resistor Remove/Install:




3. Pull out the lock on the blower motor resistor wire harness connector to unlock the connector latch.
4. Depress the latch on the blower motor resistor wire harness connector and unplug the connector from the resistor.
5. Remove the two screws that secure the resistor to the heater-A/C housing.
6. Remove the resistor from the Heater-A/C housing.

INSTALLATION
1. Reverse the removal procedures to install.
2. Tighten the mounting screws to 2.2 Nm (20 in lbs.).
pro multis · About Operation CHARM