Fog/Driving Lamp: Service and Repair

REMOVAL
1. Disconnect the headlamp and dash wire harness connector from the fog lamp pigtail wire connector.

Fig.9 Fog Lamp:

2. Remove the screws that secure the fog lamp unit to the bumper support.
3 .Remove the fog lamp unit from the bumper support.

INSTALLATION
1. Position the fog lamp unit to the bumper support.
2. Install and tighten the screws that secure the fog lamp unit to the bumper support.
3. Reconnect the fog lamp pigtail wire connector to the headlamp and dash wire harness connector.