Dome Lamp: Service and Repair

SOUND BAR DOME LAMP

REMOVAL
1. Disconnect and isolate the battery negative cable
2. Insert a small flat blade between the lamp housing and lamp lens. Carefully pry lamp lens from the lamp housing.
3. Seperate lens from lamp.

Fig.1 Sound Bar Dome Lamp:

4. Remove the screws attaching the lamp to the sound bar (Fig.1).
5. Disengage lamp electrical connector.

INSTALLATION
1. Engage lamp electrical connector.
2. Position lamp in sound bar.
3. Install the screws attaching the lamp to the sound bar.
4. Position lamp lens on lamp housing and press into place.
5. Connect the battery negative cable.