Turn Signal Lamp: Service and Repair

FRONT PARK/TURN SIGNAL LAMP HOUSING
REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.12 Park/Turn Signal Lamp:

2. Remove the park/turn signal lamp housing screws.
3. Separate the park/turn signal lamp housing from the fender.
4. Rotate bulb socket one third turn counter-clockwise and separate bulb socket from lamp.

INSTALLATION
1. Install the bulb socket in the lamp housing.
2. Position the park/turn signal lamp housing in the fender.
3. Install the park/turn signal lamp housing screws
4. Connect the battery negative cable.