Left Power Seat Switch Test

For complete circuit diagrams, refer to Power Seat in Wiring Diagrams.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the outboard seat cushion side shield.

Fig.5 Six-Way Power Seat Switch Continuity:

Fig.6 Diagnosing Power Seat Switch:

Power Seat Switch Continuity Chart:

3. Use an ohmmeter to test the continuity of the power seat switch in each switch position. See the Power Seat Switch Continuity chart and switch below. If OK, refer to Diagnosis and Testing the Power Seat Track in this section. If not OK, replace the faulty power seat switch unit.